#include <pcl/surface/3rdparty/opennurbs/opennurbs_brep.h>

Inheritance diagram for ON_Brep:

Public Member Functions
void	DestroyRuntimeCache (bool bDelete=true)
unsigned int	SizeOf () const
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const
bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const
	ON_Brep ()
	~ON_Brep ()
	ON_Brep (const ON_Brep &)
ON_Brep &	operator= (const ON_Brep &)
void	MemoryRelocate ()
bool	IsDuplicate (const ON_Brep &other, double tolerance=ON_ZERO_TOLERANCE) const
void	Destroy ()
void	EmergencyDestroy ()
int	CreateMesh (const ON_MeshParameters &mp, ON_SimpleArray< ON_Mesh * > &mesh_list) const
void	DestroyMesh (ON::mesh_type mesh_type, bool bDeleteMesh=true)
int	GetMesh (ON::mesh_type mesh_type, ON_SimpleArray< const ON_Mesh * > &meshes) const
bool	Create (ON_Surface *&pSurface)
bool	Create (ON_NurbsSurface *&pNurbsSurface)
bool	Create (ON_PlaneSurface *&pPlaneSurface)
bool	Create (ON_RevSurface *&pRevSurface)
bool	Create (ON_SumSurface *&pSumSurface)
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
bool	IsValidTopology (ON_TextLog *text_log=NULL) const
bool	IsValidGeometry (ON_TextLog *text_log=NULL) const
bool	IsValidTolerancesAndFlags (ON_TextLog *text_log=NULL) const
bool	IsValidForV2 () const
bool	IsValidForV2 (const ON_BrepTrim &) const
bool	IsValidForV2 (const ON_BrepEdge &) const
void	Dump (ON_TextLog &) const
ON_BOOL32	Write (ON_BinaryArchive &) const
ON_BOOL32	Read (ON_BinaryArchive &)
ON::object_type	ObjectType () const
int	Dimension () const
void	ClearBoundingBox ()
ON_BOOL32	GetBBox (double , double , ON_BOOL32=false) const
ON_BOOL32	Transform (const ON_Xform &)
ON_BOOL32	SwapCoordinates (int, int)
ON_BOOL32	HasBrepForm () const
ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
int	AddTrimCurve (ON_Curve *)
int	AddEdgeCurve (ON_Curve *)
int	AddSurface (ON_Surface *)
bool	SetEdgeCurve (ON_BrepEdge &edge, int c3_index, const ON_Interval *sub_domain=NULL)
bool	SetTrimCurve (ON_BrepTrim &trim, int c2_index, const ON_Interval *sub_domain=NULL)
ON_BrepVertex &	NewVertex ()
ON_BrepVertex &	NewVertex (ON_3dPoint vertex_point, double vertex_tolerance=ON_UNSET_VALUE)
ON_BrepEdge &	NewEdge (int=-1)
ON_BrepEdge &	NewEdge (ON_BrepVertex &, ON_BrepVertex &, int=-1, const ON_Interval *=NULL, double edge_tolerance=ON_UNSET_VALUE)
ON_BrepFace &	NewFace (int si=-1)
ON_BrepFace *	NewFace (const ON_Surface &surface)
ON_BrepFace *	NewFace (ON_Surface *pSurface, int vid[4], int eid[4], ON_BOOL32 bRev3d[4])
ON_BrepFace *	NewRuledFace (const ON_BrepEdge &edgeA, bool bRevEdgeA, const ON_BrepEdge &edgeB, bool bRevEdgeB)
ON_BrepFace *	NewConeFace (const ON_BrepVertex &vertex, const ON_BrepEdge &edge, bool bRevEdge)
ON_BrepLoop &	NewLoop (ON_BrepLoop::TYPE)
ON_BrepLoop &	NewLoop (ON_BrepLoop::TYPE loop_type, ON_BrepFace &face)
ON_BrepLoop *	NewOuterLoop (int face_index)
ON_BrepLoop *	NewOuterLoop (int face_index, int vid[4], int eid[4], ON_BOOL32 bRev3d[4])
bool	NewPlanarFaceLoop (int face_index, ON_BrepLoop::TYPE loop_type, ON_SimpleArray< ON_Curve * > &boundary, ON_BOOL32 bDuplicateCurves=true)
ON_BrepTrim &	NewTrim (int c2i=-1)
ON_BrepTrim &	NewTrim (ON_BOOL32 bRev3d, ON_BrepLoop &loop, int c2i=-1)
ON_BrepTrim &	NewTrim (ON_BrepEdge &edge, ON_BOOL32 bRev3d, int c2i=-1)
ON_BrepTrim &	NewTrim (ON_BrepEdge &edge, ON_BOOL32 bRev3d, ON_BrepLoop &loop, int c2i=-1)
ON_BrepTrim &	NewSingularTrim (const ON_BrepVertex &vertex, ON_BrepLoop &loop, ON_Surface::ISO iso, int c2i=-1)
ON_BrepVertex &	NewPointOnFace (ON_BrepFace &face, double s, double t)
ON_BrepTrim &	NewCurveOnFace (ON_BrepFace &face, ON_BrepEdge &edge, ON_BOOL32 bRev3d=false, int c2i=-1)
void	Append (const ON_Brep &)
void	SetVertices (void)
bool	SetTrimIsoFlags ()
bool	SetTrimIsoFlags (ON_BrepFace &)
bool	SetTrimIsoFlags (ON_BrepLoop &)
bool	SetTrimIsoFlags (ON_BrepTrim &)
ON_BrepTrim::TYPE	TrimType (const ON_BrepTrim &trim, ON_BOOL32 bLazy=true) const
bool	SetTrimTypeFlags (ON_BOOL32 bLazy=false)
bool	SetTrimTypeFlags (ON_BrepFace &, ON_BOOL32 bLazy=false)
bool	SetTrimTypeFlags (ON_BrepLoop &, ON_BOOL32 bLazy=false)
bool	SetTrimTypeFlags (ON_BrepTrim &, ON_BOOL32 bLazy=false)
bool	GetTrim2dStart (int trim_index, ON_2dPoint &) const
bool	GetTrim2dEnd (int, ON_2dPoint &) const
bool	GetTrim3dStart (int, ON_3dPoint &) const
bool	GetTrim3dEnd (int, ON_3dPoint &) const
ON_BrepLoop::TYPE	ComputeLoopType (const ON_BrepLoop &) const
bool	SetVertexTolerance (ON_BrepVertex &vertex, ON_BOOL32 bLazy=false) const
virtual bool	SetTrimTolerance (ON_BrepTrim &trim, ON_BOOL32 bLazy=false) const
virtual bool	SetEdgeTolerance (ON_BrepEdge &edge, ON_BOOL32 bLazy=false) const
bool	SetVertexTolerances (ON_BOOL32 bLazy=false)
bool	SetTrimTolerances (ON_BOOL32 bLazy=false)
bool	SetEdgeTolerances (ON_BOOL32 bLazy=false)
virtual bool	SetTrimBoundingBox (ON_BrepTrim &trim, ON_BOOL32 bLazy=false)
virtual bool	SetTrimBoundingBoxes (ON_BrepLoop &loop, ON_BOOL32 bLazy=false)
virtual bool	SetTrimBoundingBoxes (ON_BrepFace &face, ON_BOOL32 bLazy=false)
virtual bool	SetTrimBoundingBoxes (ON_BOOL32 bLazy=false)
void	SetTolerancesBoxesAndFlags (ON_BOOL32 bLazy=false, ON_BOOL32 bSetVertexTolerances=true, ON_BOOL32 bSetEdgeTolerances=true, ON_BOOL32 bSetTrimTolerances=true, ON_BOOL32 bSetTrimIsoFlags=true, ON_BOOL32 bSetTrimTypeFlags=true, ON_BOOL32 bSetLoopTypeFlags=true, ON_BOOL32 bSetTrimBoxes=true)
int	SurfaceUseCount (int surface_index, int max_count=0) const
int	EdgeCurveUseCount (int c3_index, int max_count=0) const
int	TrimCurveUseCount (int c2_index, int max_count=0) const
ON_Curve *	Loop3dCurve (const ON_BrepLoop &loop, ON_BOOL32 bRevCurveIfFaceRevIsTrue=false) const
int	Loop3dCurve (const ON_BrepLoop &loop, ON_SimpleArray< ON_Curve * > &curve_list, ON_BOOL32 bRevCurveIfFaceRevIsTrue=false) const
ON_Curve *	Loop2dCurve (const ON_BrepLoop &loop) const
virtual int	SolidOrientation () const
bool	IsSolid () const
bool	IsManifold (ON_BOOL32 pbIsOriented=NULL, ON_BOOL32 pbHasBoundary=NULL) const
bool	IsPointInside (ON_3dPoint P, double tolerance, bool bStrictlyInside) const
bool	IsSurface () const
bool	FaceIsSurface (int) const
bool	LoopIsSurfaceBoundary (int) const
bool	FlipReversedSurfaces ()
bool	SetTrimDomain (int, const ON_Interval &)
bool	SetEdgeDomain (int, const ON_Interval &)
void	Flip ()
void	FlipFace (ON_BrepFace &)
void	FlipLoop (ON_BrepLoop &)
int	LoopDirection (const ON_BrepLoop &) const
bool	SortFaceLoops (ON_BrepFace &face) const
bool	CombineCoincidentVertices (ON_BrepVertex &, ON_BrepVertex &)
bool	CombineCoincidentEdges (ON_BrepEdge &, ON_BrepEdge &)
ON_BrepEdge *	CombineContiguousEdges (int edge_index0, int edge_iindex1, double angle_tolerance_radians=ON_PI/180.0)
void	DeleteVertex (ON_BrepVertex &vertex)
void	DeleteEdge (ON_BrepEdge &edge, ON_BOOL32 bDeleteEdgeVertices)
void	DeleteTrim (ON_BrepTrim &trim, ON_BOOL32 bDeleteTrimEdges)
void	DeleteLoop (ON_BrepLoop &loop, ON_BOOL32 bDeleteLoopEdges)
void	DeleteFace (ON_BrepFace &face, ON_BOOL32 bDeleteFaceEdges)
void	DeleteSurface (int s_index)
void	Delete2dCurve (int c2_index)
void	Delete3dCurve (int c3_index)
void	LabelConnectedComponent (int face_index, int label)
int	LabelConnectedComponents ()
int	GetConnectedComponents (ON_SimpleArray< ON_Brep * > &components, bool bDuplicateMeshes) const
ON_Brep *	SubBrep (int subfi_count, const int sub_fi, ON_Brep sub_brep=0) const
bool	HasRegionTopology () const
const ON_BrepRegionTopology &	RegionTopology () const
void	DestroyRegionTopology ()
ON_Brep *	DuplicateFace (int face_index, ON_BOOL32 bDuplicateMeshes) const
ON_Brep *	DuplicateFaces (int face_count, const int *face_index, ON_BOOL32 bDuplicateMeshes) const
ON_Brep *	ExtractFace (int face_index)
bool	StandardizeEdgeCurve (int edge_index, bool bAdjustEnds)
bool	StandardizeEdgeCurve (int edge_index, bool bAdjustEnds, int EdgeCurveUse)
void	StandardizeEdgeCurves (bool bAdjustEnds)
bool	StandardizeTrimCurve (int trim_index)
void	StandardizeTrimCurves ()
bool	StandardizeFaceSurface (int face_index)
void	StandardizeFaceSurfaces ()
ON_DEPRECATED void	StardardizeFaceSurfaces ()
void	Standardize ()
bool	ShrinkSurface (ON_BrepFace &face, int DisableSide=0)
bool	ShrinkSurfaces ()
bool	Compact ()
bool	CullUnusedFaces ()
bool	CullUnusedLoops ()
bool	CullUnusedTrims ()
bool	CullUnusedEdges ()
bool	CullUnusedVertices ()
bool	CullUnused3dCurves ()
bool	CullUnused2dCurves ()
bool	CullUnusedSurfaces ()
int	PrevTrim (int) const
int	NextTrim (int) const
int	PrevEdge (int current_edge_index, int endi, int *prev_endi=NULL) const
int	NextEdge (int current_edge_index, int endi, int *next_endi=NULL) const
const ON_Geometry *	BrepComponent (ON_COMPONENT_INDEX ci) const
ON_BrepVertex *	Vertex (int vertex_index) const
ON_BrepVertex *	Vertex (ON_COMPONENT_INDEX vertex_index) const
ON_BrepEdge *	Edge (int edge_index) const
ON_BrepEdge *	Edge (ON_COMPONENT_INDEX edge_index) const
ON_BrepTrim *	Trim (int trim_index) const
ON_BrepTrim *	Trim (ON_COMPONENT_INDEX trim_index) const
ON_BrepLoop *	Loop (int loop_index) const
ON_BrepLoop *	Loop (ON_COMPONENT_INDEX loop_index) const
ON_BrepFace *	Face (int face_index) const
ON_BrepFace *	Face (ON_COMPONENT_INDEX face_index) const
bool	RemoveSlits ()
bool	RemoveSlits (ON_BrepFace &F)
int	MergeFaces (int fid0, int fid1)
bool	MergeFaces ()
bool	RemoveNesting (bool bExtractSingleSegments, bool bEdges=true, bool bTrimCurves=true)
bool	CollapseEdge (int edge_index, bool bCloseTrimGap=true, int vertex_index=-1)
bool	ChangeVertex (int old_vi, int new_vi, bool bClearTolerances)
bool	CloseTrimGap (ON_BrepTrim &trim0, ON_BrepTrim &trim1)
int	RemoveWireEdges (bool bDeleteVertices=true)
int	RemoveWireVertices ()
void	Set_user (ON_U u)
void	Clear_vertex_user_i ()
void	Clear_edge_user_i (int)
void	Clear_edge_user_i ()
void	Clear_trim_user_i ()
void	Clear_loop_user_i ()
void	Clear_face_user_i ()
void	Clear_user_i ()
Public Member Functions inherited from ON_Geometry
	ON_Geometry ()
	ON_Geometry (const ON_Geometry &)
ON_Geometry &	operator= (const ON_Geometry &)
virtual	~ON_Geometry ()
ON_BoundingBox	BoundingBox () const
ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const
ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const
ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Translate (const ON_3dVector &translation_vector)
ON_BOOL32	Scale (double scale_factor)
virtual bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const
virtual bool	IsDeformable () const
virtual bool	MakeDeformable ()
virtual ON_COMPONENT_INDEX	ComponentIndex () const
Public Member Functions inherited from ON_Object
bool	CopyFrom (const ON_Object *src)
	ON_Object ()
	ON_Object (const ON_Object &)
ON_Object &	operator= (const ON_Object &)
virtual	~ON_Object ()
void	EmergencyDestroy ()
ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const
virtual ON_UUID	ModelObjectId () const
bool	SetUserString (const wchar_t key, const wchar_t string_value)
int	SetUserStrings (int count, const ON_UserString *user_strings, bool bReplace)
bool	GetUserString (const wchar_t *key, ON_wString &string_value) const
int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const
int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const
int	UserStringCount () const
ON_BOOL32	AttachUserData (ON_UserData *pUserData)
ON_BOOL32	DetachUserData (ON_UserData *pUserData)
ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const
void	PurgeUserData ()
ON_UserData *	FirstUserData () const
void	TransformUserData (const ON_Xform &xform)
void	CopyUserData (const ON_Object &source_object)
void	MoveUserData (ON_Object &source_object)

Static Public Member Functions
static ON_Brep *	New ()
static ON_Brep *	New (const ON_Brep &)

Public Attributes
ON_U	m_brep_user
ON_CurveArray	m_C2
ON_CurveArray	m_C3
ON_SurfaceArray	m_S
ON_BrepVertexArray	m_V
ON_BrepEdgeArray	m_E
ON_BrepTrimArray	m_T
ON_BrepLoopArray	m_L
ON_BrepFaceArray	m_F

Protected Member Functions
void	Initialize ()
void	SetTrimIsoFlag (int, double[6])
void	SetTrimIsoFlag (int)
bool	SetEdgeVertex (const int, const int, const int)
bool	HopAcrossEdge (int &, int &) const
bool	SetTrimStartVertex (const int, const int)
void	SetLoopVertices (const int)
void	ClearTrimVertices ()
void	ClearEdgeVertices ()
bool	SwapLoopParameters (int)
bool	SwapTrimParameters (int)
bool	IsValidTrim (int trim_index, ON_TextLog *text_log) const
bool	IsValidTrimTopology (int trim_index, ON_TextLog *text_log) const
bool	IsValidTrimGeometry (int trim_index, ON_TextLog *text_log) const
bool	IsValidTrimTolerancesAndFlags (int trim_index, ON_TextLog *text_log) const
bool	IsValidLoop (int loop_index, ON_TextLog *text_log) const
bool	IsValidLoopTopology (int loop_index, ON_TextLog *text_log) const
bool	IsValidLoopGeometry (int loop_index, ON_TextLog *text_log) const
bool	IsValidLoopTolerancesAndFlags (int loop_index, ON_TextLog *text_log) const
bool	IsValidFace (int face_index, ON_TextLog *text_log) const
bool	IsValidFaceTopology (int face_index, ON_TextLog *text_log) const
bool	IsValidFaceGeometry (int face_index, ON_TextLog *text_log) const
bool	IsValidFaceTolerancesAndFlags (int face_index, ON_TextLog *text_log) const
bool	IsValidEdge (int edge_index, ON_TextLog *text_log) const
bool	IsValidEdgeTopology (int edge_index, ON_TextLog *text_log) const
bool	IsValidEdgeGeometry (int edge_index, ON_TextLog *text_log) const
bool	IsValidEdgeTolerancesAndFlags (int edge_index, ON_TextLog *text_log) const
bool	IsValidVertex (int vertex_index, ON_TextLog *text_log) const
bool	IsValidVertexTopology (int vertex_index, ON_TextLog *text_log) const
bool	IsValidVertexGeometry (int vertex_index, ON_TextLog *text_log) const
bool	IsValidVertexTolerancesAndFlags (int vertex_index, ON_TextLog *text_log) const
void	SetTolsFromLegacyValues ()
bool	ReadOld100 (ON_BinaryArchive &)
bool	ReadOld101 (ON_BinaryArchive &)
bool	ReadOld200 (ON_BinaryArchive &, int)
ON_Curve *	Read100_BrepCurve (ON_BinaryArchive &) const
ON_Surface *	Read100_BrepSurface (ON_BinaryArchive &) const
bool	ReadV1_LegacyTrimStuff (ON_BinaryArchive &, ON_BrepFace &, ON_BrepLoop &)
bool	ReadV1_LegacyTrim (ON_BinaryArchive &, ON_BrepFace &, ON_BrepLoop &)
bool	ReadV1_LegacyLoopStuff (ON_BinaryArchive &, ON_BrepFace &)
bool	ReadV1_LegacyLoop (ON_BinaryArchive &, ON_BrepFace &)
bool	ReadV1_LegacyFaceStuff (ON_BinaryArchive &)
bool	ReadV1_LegacyShellStuff (ON_BinaryArchive &)

Protected Attributes
ON_BoundingBox	m_bbox
int	m_is_solid

Friends
class	ON_BrepFace
class	ON_BrepRegion
class	ON_BrepFaceSide
bool	ON_BinaryArchive::ReadV1_TCODE_LEGACY_FAC (ON_Object *, ON_3dmObjectAttributes )
bool	ON_BinaryArchive::ReadV1_TCODE_LEGACY_SHL (ON_Object *, ON_3dmObjectAttributes )

Detailed Description

Definition at line 1570 of file opennurbs_brep.h.

Constructor & Destructor Documentation

◆ ON_Brep() [1/2]

ON_Brep::ON_Brep ( )

Referenced by Append(), BrepForm(), DuplicateFace(), DuplicateFaces(), ExtractFace(), IsDuplicate(), New(), New(), ON_Brep(), operator=(), and SubBrep().

◆ ~ON_Brep()

ON_Brep::~ON_Brep ( )

◆ ON_Brep() [2/2]

ON_Brep::ON_Brep ( const ON_Brep & )

References ON_Brep().

Member Function Documentation

◆ AddEdgeCurve()

int ON_Brep::AddEdgeCurve ( ON_Curve * )

◆ AddSurface()

int ON_Brep::AddSurface ( ON_Surface * )

◆ AddTrimCurve()

int ON_Brep::AddTrimCurve ( ON_Curve * )

◆ Append()

void ON_Brep::Append ( const ON_Brep & )

References ON_Brep().

◆ BrepComponent()

const ON_Geometry * ON_Brep::BrepComponent ( ON_COMPONENT_INDEX ci ) const

References ON_Geometry::ON_Geometry().

◆ BrepForm()

ON_Brep * ON_Brep::BrepForm ( ON_Brep * brep = NULL ) const

virtual

Reimplemented from ON_Geometry.

References ON_Brep().

◆ ChangeVertex()

bool ON_Brep::ChangeVertex	(	int	old_vi,
		int	new_vi,
		bool	bClearTolerances )

◆ Clear_edge_user_i() [1/2]

void ON_Brep::Clear_edge_user_i ( )

◆ Clear_edge_user_i() [2/2]

void ON_Brep::Clear_edge_user_i ( int )

◆ Clear_face_user_i()

void ON_Brep::Clear_face_user_i ( )

◆ Clear_loop_user_i()

void ON_Brep::Clear_loop_user_i ( )

◆ Clear_trim_user_i()

void ON_Brep::Clear_trim_user_i ( )

◆ Clear_user_i()

void ON_Brep::Clear_user_i ( )

◆ Clear_vertex_user_i()

void ON_Brep::Clear_vertex_user_i ( )

◆ ClearBoundingBox()

void ON_Brep::ClearBoundingBox ( )

virtual

Reimplemented from ON_Geometry.

◆ ClearEdgeVertices()

void ON_Brep::ClearEdgeVertices ( )

protected

◆ ClearTrimVertices()

void ON_Brep::ClearTrimVertices ( )

protected

◆ CloseTrimGap()

bool ON_Brep::CloseTrimGap	(	ON_BrepTrim &	trim0,
		ON_BrepTrim &	trim1 )

◆ CollapseEdge()

bool ON_Brep::CollapseEdge	(	int	edge_index,
		bool	bCloseTrimGap = true,
		int	vertex_index = -1 )

◆ CombineCoincidentEdges()

bool ON_Brep::CombineCoincidentEdges	(	ON_BrepEdge &	,
		ON_BrepEdge &	)

◆ CombineCoincidentVertices()

bool ON_Brep::CombineCoincidentVertices	(	ON_BrepVertex &	,
		ON_BrepVertex &	)

◆ CombineContiguousEdges()

ON_BrepEdge * ON_Brep::CombineContiguousEdges	(	int	edge_index0,
		int	edge_iindex1,
		double	angle_tolerance_radians = ON_PI/180.0 )

◆ Compact()

bool ON_Brep::Compact ( )

◆ ComputeLoopType()

ON_BrepLoop::TYPE ON_Brep::ComputeLoopType ( const ON_BrepLoop & ) const

◆ Create() [1/5]

bool ON_Brep::Create ( ON_NurbsSurface *& pNurbsSurface )

◆ Create() [2/5]

bool ON_Brep::Create ( ON_PlaneSurface *& pPlaneSurface )

◆ Create() [3/5]

bool ON_Brep::Create ( ON_RevSurface *& pRevSurface )

◆ Create() [4/5]

bool ON_Brep::Create ( ON_SumSurface *& pSumSurface )

◆ Create() [5/5]

bool ON_Brep::Create ( ON_Surface *& pSurface )

◆ CreateMesh()

int ON_Brep::CreateMesh	(	const ON_MeshParameters &	mp,
		ON_SimpleArray< ON_Mesh * > &	mesh_list ) const

◆ CullUnused2dCurves()

bool ON_Brep::CullUnused2dCurves ( )

◆ CullUnused3dCurves()

bool ON_Brep::CullUnused3dCurves ( )

◆ CullUnusedEdges()

bool ON_Brep::CullUnusedEdges ( )

◆ CullUnusedFaces()

bool ON_Brep::CullUnusedFaces ( )

◆ CullUnusedLoops()

bool ON_Brep::CullUnusedLoops ( )

◆ CullUnusedSurfaces()

bool ON_Brep::CullUnusedSurfaces ( )

◆ CullUnusedTrims()

bool ON_Brep::CullUnusedTrims ( )

◆ CullUnusedVertices()

bool ON_Brep::CullUnusedVertices ( )

◆ DataCRC()

ON__UINT32 ON_Brep::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

◆ Delete2dCurve()

void ON_Brep::Delete2dCurve ( int c2_index )

◆ Delete3dCurve()

void ON_Brep::Delete3dCurve ( int c3_index )

◆ DeleteEdge()

void ON_Brep::DeleteEdge	(	ON_BrepEdge &	edge,
		ON_BOOL32	bDeleteEdgeVertices )

◆ DeleteFace()

void ON_Brep::DeleteFace	(	ON_BrepFace &	face,
		ON_BOOL32	bDeleteFaceEdges )

References ON_BrepFace.

◆ DeleteLoop()

void ON_Brep::DeleteLoop	(	ON_BrepLoop &	loop,
		ON_BOOL32	bDeleteLoopEdges )

◆ DeleteSurface()

void ON_Brep::DeleteSurface ( int s_index )

◆ DeleteTrim()

void ON_Brep::DeleteTrim	(	ON_BrepTrim &	trim,
		ON_BOOL32	bDeleteTrimEdges )

◆ DeleteVertex()

void ON_Brep::DeleteVertex ( ON_BrepVertex & vertex )

◆ Destroy()

void ON_Brep::Destroy ( )

◆ DestroyMesh()

void ON_Brep::DestroyMesh	(	ON::mesh_type	mesh_type,
		bool	bDeleteMesh = true )

◆ DestroyRegionTopology()

void ON_Brep::DestroyRegionTopology ( )

◆ DestroyRuntimeCache()

void ON_Brep::DestroyRuntimeCache ( bool bDelete = true )

virtual

Reimplemented from ON_Object.

◆ Dimension()

int ON_Brep::Dimension ( ) const

virtual

Implements ON_Geometry.

◆ Dump()

void ON_Brep::Dump ( ON_TextLog & ) const

virtual

Reimplemented from ON_Object.

◆ DuplicateFace()

ON_Brep * ON_Brep::DuplicateFace	(	int	face_index,
		ON_BOOL32	bDuplicateMeshes ) const

References ON_Brep().

◆ DuplicateFaces()

ON_Brep * ON_Brep::DuplicateFaces	(	int	face_count,
		const int *	face_index,
		ON_BOOL32	bDuplicateMeshes ) const

References ON_Brep().

◆ Edge() [1/2]

ON_BrepEdge * ON_Brep::Edge ( int edge_index ) const

◆ Edge() [2/2]

ON_BrepEdge * ON_Brep::Edge ( ON_COMPONENT_INDEX edge_index ) const

◆ EdgeCurveUseCount()

int ON_Brep::EdgeCurveUseCount	(	int	c3_index,
		int	max_count = 0 ) const

◆ EmergencyDestroy()

void ON_Brep::EmergencyDestroy ( )

◆ EvaluatePoint()

bool ON_Brep::EvaluatePoint	(	const class ON_ObjRef &	objref,
		ON_3dPoint &	P ) const

virtual

Reimplemented from ON_Geometry.

◆ ExtractFace()

ON_Brep * ON_Brep::ExtractFace ( int face_index )

References ON_Brep().

◆ Face() [1/2]

ON_BrepFace * ON_Brep::Face ( int face_index ) const

References ON_BrepFace.

◆ Face() [2/2]

ON_BrepFace * ON_Brep::Face ( ON_COMPONENT_INDEX face_index ) const

References ON_BrepFace.

◆ FaceIsSurface()

bool ON_Brep::FaceIsSurface ( int ) const

◆ Flip()

void ON_Brep::Flip ( )

◆ FlipFace()

void ON_Brep::FlipFace ( ON_BrepFace & )

References ON_BrepFace.

◆ FlipLoop()

void ON_Brep::FlipLoop ( ON_BrepLoop & )

◆ FlipReversedSurfaces()

bool ON_Brep::FlipReversedSurfaces ( )

◆ GetBBox()

ON_BOOL32 ON_Brep::GetBBox	(	double *	,
		double *	,
		ON_BOOL32	= false ) const

virtual

Implements ON_Geometry.

◆ GetConnectedComponents()

int ON_Brep::GetConnectedComponents	(	ON_SimpleArray< ON_Brep * > &	components,
		bool	bDuplicateMeshes ) const

◆ GetMesh()

int ON_Brep::GetMesh	(	ON::mesh_type	mesh_type,
		ON_SimpleArray< const ON_Mesh * > &	meshes ) const

◆ GetTrim2dEnd()

bool ON_Brep::GetTrim2dEnd	(	int	,
		ON_2dPoint &	) const

◆ GetTrim2dStart()

bool ON_Brep::GetTrim2dStart	(	int	trim_index,
		ON_2dPoint &	) const

◆ GetTrim3dEnd()

bool ON_Brep::GetTrim3dEnd	(	int	,
		ON_3dPoint &	) const

◆ GetTrim3dStart()

bool ON_Brep::GetTrim3dStart	(	int	,
		ON_3dPoint &	) const

◆ HasBrepForm()

ON_BOOL32 ON_Brep::HasBrepForm ( ) const

virtual

Reimplemented from ON_Geometry.

◆ HasRegionTopology()

bool ON_Brep::HasRegionTopology ( ) const

◆ HopAcrossEdge()

bool ON_Brep::HopAcrossEdge	(	int &	,
		int &	) const

protected

◆ Initialize()

void ON_Brep::Initialize ( )

protected

◆ IsDuplicate()

bool ON_Brep::IsDuplicate	(	const ON_Brep &	other,
		double	tolerance = ON_ZERO_TOLERANCE ) const

References ON_Brep().

◆ IsManifold()

bool ON_Brep::IsManifold	(	ON_BOOL32 *	pbIsOriented = NULL,
		ON_BOOL32 *	pbHasBoundary = NULL ) const

◆ IsPointInside()

bool ON_Brep::IsPointInside	(	ON_3dPoint	P,
		double	tolerance,
		bool	bStrictlyInside ) const

◆ IsSolid()

bool ON_Brep::IsSolid ( ) const

◆ IsSurface()

bool ON_Brep::IsSurface ( ) const

◆ IsValid()

ON_BOOL32 ON_Brep::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

◆ IsValidEdge()

bool ON_Brep::IsValidEdge	(	int	edge_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidEdgeGeometry()

bool ON_Brep::IsValidEdgeGeometry	(	int	edge_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidEdgeTolerancesAndFlags()

bool ON_Brep::IsValidEdgeTolerancesAndFlags	(	int	edge_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidEdgeTopology()

bool ON_Brep::IsValidEdgeTopology	(	int	edge_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidFace()

bool ON_Brep::IsValidFace	(	int	face_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidFaceGeometry()

bool ON_Brep::IsValidFaceGeometry	(	int	face_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidFaceTolerancesAndFlags()

bool ON_Brep::IsValidFaceTolerancesAndFlags	(	int	face_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidFaceTopology()

bool ON_Brep::IsValidFaceTopology	(	int	face_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidForV2() [1/3]

bool ON_Brep::IsValidForV2 ( ) const

◆ IsValidForV2() [2/3]

bool ON_Brep::IsValidForV2 ( const ON_BrepEdge & ) const

◆ IsValidForV2() [3/3]

bool ON_Brep::IsValidForV2 ( const ON_BrepTrim & ) const

◆ IsValidGeometry()

bool ON_Brep::IsValidGeometry ( ON_TextLog * text_log = NULL ) const

◆ IsValidLoop()

bool ON_Brep::IsValidLoop	(	int	loop_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidLoopGeometry()

bool ON_Brep::IsValidLoopGeometry	(	int	loop_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidLoopTolerancesAndFlags()

bool ON_Brep::IsValidLoopTolerancesAndFlags	(	int	loop_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidLoopTopology()

bool ON_Brep::IsValidLoopTopology	(	int	loop_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidTolerancesAndFlags()

bool ON_Brep::IsValidTolerancesAndFlags ( ON_TextLog * text_log = NULL ) const

◆ IsValidTopology()

bool ON_Brep::IsValidTopology ( ON_TextLog * text_log = NULL ) const

◆ IsValidTrim()

bool ON_Brep::IsValidTrim	(	int	trim_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidTrimGeometry()

bool ON_Brep::IsValidTrimGeometry	(	int	trim_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidTrimTolerancesAndFlags()

bool ON_Brep::IsValidTrimTolerancesAndFlags	(	int	trim_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidTrimTopology()

bool ON_Brep::IsValidTrimTopology	(	int	trim_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidVertex()

bool ON_Brep::IsValidVertex	(	int	vertex_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidVertexGeometry()

bool ON_Brep::IsValidVertexGeometry	(	int	vertex_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidVertexTolerancesAndFlags()

bool ON_Brep::IsValidVertexTolerancesAndFlags	(	int	vertex_index,
		ON_TextLog *	text_log ) const

protected

◆ IsValidVertexTopology()

bool ON_Brep::IsValidVertexTopology	(	int	vertex_index,
		ON_TextLog *	text_log ) const

protected

◆ LabelConnectedComponent()

void ON_Brep::LabelConnectedComponent	(	int	face_index,
		int	label )

◆ LabelConnectedComponents()

int ON_Brep::LabelConnectedComponents ( )

◆ Loop() [1/2]

ON_BrepLoop * ON_Brep::Loop ( int loop_index ) const

◆ Loop() [2/2]

ON_BrepLoop * ON_Brep::Loop ( ON_COMPONENT_INDEX loop_index ) const

◆ Loop2dCurve()

ON_Curve * ON_Brep::Loop2dCurve ( const ON_BrepLoop & loop ) const

◆ Loop3dCurve() [1/2]

ON_Curve * ON_Brep::Loop3dCurve	(	const ON_BrepLoop &	loop,
		ON_BOOL32	bRevCurveIfFaceRevIsTrue = false ) const

◆ Loop3dCurve() [2/2]

int ON_Brep::Loop3dCurve	(	const ON_BrepLoop &	loop,
		ON_SimpleArray< ON_Curve * > &	curve_list,
		ON_BOOL32	bRevCurveIfFaceRevIsTrue = false ) const

◆ LoopDirection()

int ON_Brep::LoopDirection ( const ON_BrepLoop & ) const

◆ LoopIsSurfaceBoundary()

bool ON_Brep::LoopIsSurfaceBoundary ( int ) const

◆ MemoryRelocate()

void ON_Brep::MemoryRelocate ( )

virtual

Reimplemented from ON_Object.

◆ MergeFaces() [1/2]

bool ON_Brep::MergeFaces ( )

◆ MergeFaces() [2/2]

int ON_Brep::MergeFaces	(	int	fid0,
		int	fid1 )

◆ New() [1/2]

ON_Brep * ON_Brep::New ( )

static

References ON_Brep().

◆ New() [2/2]

ON_Brep * ON_Brep::New ( const ON_Brep & )

static

References ON_Brep().

◆ NewConeFace()

ON_BrepFace * ON_Brep::NewConeFace	(	const ON_BrepVertex &	vertex,
		const ON_BrepEdge &	edge,
		bool	bRevEdge )

References ON_BrepFace.

◆ NewCurveOnFace()

ON_BrepTrim & ON_Brep::NewCurveOnFace	(	ON_BrepFace &	face,
		ON_BrepEdge &	edge,
		ON_BOOL32	bRev3d = false,
		int	c2i = -1 )

References ON_BrepFace.

◆ NewEdge() [1/2]

ON_BrepEdge & ON_Brep::NewEdge ( int = -1 )

◆ NewEdge() [2/2]

ON_BrepEdge & ON_Brep::NewEdge	(	ON_BrepVertex &	,
		ON_BrepVertex &	,
		int	= -1,
		const ON_Interval *	= NULL,
		double	edge_tolerance = ON_UNSET_VALUE )

◆ NewFace() [1/3]

ON_BrepFace * ON_Brep::NewFace ( const ON_Surface & surface )

References ON_BrepFace.

◆ NewFace() [2/3]

ON_BrepFace & ON_Brep::NewFace ( int si = -1 )

References ON_BrepFace.

◆ NewFace() [3/3]

ON_BrepFace * ON_Brep::NewFace	(	ON_Surface *	pSurface,
		int	vid[4],
		int	eid[4],
		ON_BOOL32	bRev3d[4] )

References ON_BrepFace.

◆ NewLoop() [1/2]

ON_BrepLoop & ON_Brep::NewLoop	(	ON_BrepLoop::TYPE	loop_type,
		ON_BrepFace &	face )

References ON_BrepFace.

◆ NewLoop() [2/2]

ON_BrepLoop & ON_Brep::NewLoop ( ON_BrepLoop::TYPE )

◆ NewOuterLoop() [1/2]

ON_BrepLoop * ON_Brep::NewOuterLoop ( int face_index )

◆ NewOuterLoop() [2/2]

ON_BrepLoop * ON_Brep::NewOuterLoop	(	int	face_index,
		int	vid[4],
		int	eid[4],
		ON_BOOL32	bRev3d[4] )

◆ NewPlanarFaceLoop()

bool ON_Brep::NewPlanarFaceLoop	(	int	face_index,
		ON_BrepLoop::TYPE	loop_type,
		ON_SimpleArray< ON_Curve * > &	boundary,
		ON_BOOL32	bDuplicateCurves = true )

◆ NewPointOnFace()

ON_BrepVertex & ON_Brep::NewPointOnFace	(	ON_BrepFace &	face,
		double	s,
		double	t )

References ON_BrepFace.

◆ NewRuledFace()

ON_BrepFace * ON_Brep::NewRuledFace	(	const ON_BrepEdge &	edgeA,
		bool	bRevEdgeA,
		const ON_BrepEdge &	edgeB,
		bool	bRevEdgeB )

References ON_BrepFace.

◆ NewSingularTrim()

ON_BrepTrim & ON_Brep::NewSingularTrim	(	const ON_BrepVertex &	vertex,
		ON_BrepLoop &	loop,
		ON_Surface::ISO	iso,
		int	c2i = -1 )

◆ NewTrim() [1/4]

ON_BrepTrim & ON_Brep::NewTrim ( int c2i = -1 )

◆ NewTrim() [2/4]

ON_BrepTrim & ON_Brep::NewTrim	(	ON_BOOL32	bRev3d,
		ON_BrepLoop &	loop,
		int	c2i = -1 )

◆ NewTrim() [3/4]

ON_BrepTrim & ON_Brep::NewTrim	(	ON_BrepEdge &	edge,
		ON_BOOL32	bRev3d,
		int	c2i = -1 )

◆ NewTrim() [4/4]

ON_BrepTrim & ON_Brep::NewTrim	(	ON_BrepEdge &	edge,
		ON_BOOL32	bRev3d,
		ON_BrepLoop &	loop,
		int	c2i = -1 )

◆ NewVertex() [1/2]

ON_BrepVertex & ON_Brep::NewVertex ( )

◆ NewVertex() [2/2]

ON_BrepVertex & ON_Brep::NewVertex	(	ON_3dPoint	vertex_point,
		double	vertex_tolerance = ON_UNSET_VALUE )

◆ NextEdge()

int ON_Brep::NextEdge	(	int	current_edge_index,
		int	endi,
		int *	next_endi = NULL ) const

◆ NextTrim()

int ON_Brep::NextTrim ( int ) const

◆ ObjectType()

ON::object_type ON_Brep::ObjectType ( ) const

virtual

Reimplemented from ON_Object.

◆ operator=()

ON_Brep & ON_Brep::operator= ( const ON_Brep & )

References ON_Brep().

◆ PrevEdge()

int ON_Brep::PrevEdge	(	int	current_edge_index,
		int	endi,
		int *	prev_endi = NULL ) const

◆ PrevTrim()

int ON_Brep::PrevTrim ( int ) const

◆ Read()

ON_BOOL32 ON_Brep::Read ( ON_BinaryArchive & )

virtual

Reimplemented from ON_Object.

◆ Read100_BrepCurve()

ON_Curve * ON_Brep::Read100_BrepCurve ( ON_BinaryArchive & ) const

protected

◆ Read100_BrepSurface()

ON_Surface * ON_Brep::Read100_BrepSurface ( ON_BinaryArchive & ) const

protected

◆ ReadOld100()

bool ON_Brep::ReadOld100 ( ON_BinaryArchive & )

protected

◆ ReadOld101()

bool ON_Brep::ReadOld101 ( ON_BinaryArchive & )

protected

◆ ReadOld200()

bool ON_Brep::ReadOld200	(	ON_BinaryArchive &	,
		int	)

protected

◆ ReadV1_LegacyFaceStuff()

bool ON_Brep::ReadV1_LegacyFaceStuff ( ON_BinaryArchive & )

protected

◆ ReadV1_LegacyLoop()

bool ON_Brep::ReadV1_LegacyLoop	(	ON_BinaryArchive &	,
		ON_BrepFace &	)

protected

References ON_BrepFace.

◆ ReadV1_LegacyLoopStuff()

bool ON_Brep::ReadV1_LegacyLoopStuff	(	ON_BinaryArchive &	,
		ON_BrepFace &	)

protected

References ON_BrepFace.

◆ ReadV1_LegacyShellStuff()

bool ON_Brep::ReadV1_LegacyShellStuff ( ON_BinaryArchive & )

protected

◆ ReadV1_LegacyTrim()

bool ON_Brep::ReadV1_LegacyTrim	(	ON_BinaryArchive &	,
		ON_BrepFace &	,
		ON_BrepLoop &	)

protected

References ON_BrepFace.

◆ ReadV1_LegacyTrimStuff()

bool ON_Brep::ReadV1_LegacyTrimStuff	(	ON_BinaryArchive &	,
		ON_BrepFace &	,
		ON_BrepLoop &	)

protected

References ON_BrepFace.

◆ RegionTopology()

const ON_BrepRegionTopology & ON_Brep::RegionTopology ( ) const

◆ RemoveNesting()

bool ON_Brep::RemoveNesting	(	bool	bExtractSingleSegments,
		bool	bEdges = true,
		bool	bTrimCurves = true )

◆ RemoveSlits() [1/2]

bool ON_Brep::RemoveSlits ( )

◆ RemoveSlits() [2/2]

bool ON_Brep::RemoveSlits ( ON_BrepFace & F )

References ON_BrepFace.

◆ RemoveWireEdges()

int ON_Brep::RemoveWireEdges ( bool bDeleteVertices = true )

◆ RemoveWireVertices()

int ON_Brep::RemoveWireVertices ( )

◆ Set_user()

void ON_Brep::Set_user ( ON_U u )

◆ SetEdgeCurve()

bool ON_Brep::SetEdgeCurve	(	ON_BrepEdge &	edge,
		int	c3_index,
		const ON_Interval *	sub_domain = NULL )

◆ SetEdgeDomain()

bool ON_Brep::SetEdgeDomain	(	int	,
		const ON_Interval &	)

◆ SetEdgeTolerance()

virtual bool ON_Brep::SetEdgeTolerance	(	ON_BrepEdge &	edge,
		ON_BOOL32	bLazy = false ) const

virtual

◆ SetEdgeTolerances()

bool ON_Brep::SetEdgeTolerances ( ON_BOOL32 bLazy = false )

◆ SetEdgeVertex()

bool ON_Brep::SetEdgeVertex	(	const int	,
		const int	,
		const int	)

protected

◆ SetLoopVertices()

void ON_Brep::SetLoopVertices ( const int )

protected

◆ SetTolerancesBoxesAndFlags()

void ON_Brep::SetTolerancesBoxesAndFlags	(	ON_BOOL32	bLazy = false,
		ON_BOOL32	bSetVertexTolerances = true,
		ON_BOOL32	bSetEdgeTolerances = true,
		ON_BOOL32	bSetTrimTolerances = true,
		ON_BOOL32	bSetTrimIsoFlags = true,
		ON_BOOL32	bSetTrimTypeFlags = true,
		ON_BOOL32	bSetLoopTypeFlags = true,
		ON_BOOL32	bSetTrimBoxes = true )

◆ SetTolsFromLegacyValues()

void ON_Brep::SetTolsFromLegacyValues ( )

protected

◆ SetTrimBoundingBox()

virtual bool ON_Brep::SetTrimBoundingBox	(	ON_BrepTrim &	trim,
		ON_BOOL32	bLazy = false )

virtual

◆ SetTrimBoundingBoxes() [1/3]

virtual bool ON_Brep::SetTrimBoundingBoxes ( ON_BOOL32 bLazy = false )

virtual

◆ SetTrimBoundingBoxes() [2/3]

virtual bool ON_Brep::SetTrimBoundingBoxes	(	ON_BrepFace &	face,
		ON_BOOL32	bLazy = false )

virtual

References ON_BrepFace.

◆ SetTrimBoundingBoxes() [3/3]

virtual bool ON_Brep::SetTrimBoundingBoxes	(	ON_BrepLoop &	loop,
		ON_BOOL32	bLazy = false )

virtual

◆ SetTrimCurve()

bool ON_Brep::SetTrimCurve	(	ON_BrepTrim &	trim,
		int	c2_index,
		const ON_Interval *	sub_domain = NULL )

◆ SetTrimDomain()

bool ON_Brep::SetTrimDomain	(	int	,
		const ON_Interval &	)

◆ SetTrimIsoFlag() [1/2]

void ON_Brep::SetTrimIsoFlag ( int )

protected

◆ SetTrimIsoFlag() [2/2]

void ON_Brep::SetTrimIsoFlag	(	int	,
		double	[6] )

protected

◆ SetTrimIsoFlags() [1/4]

bool ON_Brep::SetTrimIsoFlags ( )

◆ SetTrimIsoFlags() [2/4]

bool ON_Brep::SetTrimIsoFlags ( ON_BrepFace & )

References ON_BrepFace.

◆ SetTrimIsoFlags() [3/4]

bool ON_Brep::SetTrimIsoFlags ( ON_BrepLoop & )

◆ SetTrimIsoFlags() [4/4]

bool ON_Brep::SetTrimIsoFlags ( ON_BrepTrim & )

◆ SetTrimStartVertex()

bool ON_Brep::SetTrimStartVertex	(	const int	,
		const int	)

protected

◆ SetTrimTolerance()

virtual bool ON_Brep::SetTrimTolerance	(	ON_BrepTrim &	trim,
		ON_BOOL32	bLazy = false ) const

virtual

◆ SetTrimTolerances()

bool ON_Brep::SetTrimTolerances ( ON_BOOL32 bLazy = false )

◆ SetTrimTypeFlags() [1/4]

bool ON_Brep::SetTrimTypeFlags ( ON_BOOL32 bLazy = false )

◆ SetTrimTypeFlags() [2/4]

bool ON_Brep::SetTrimTypeFlags	(	ON_BrepFace &	,
		ON_BOOL32	bLazy = false )

References ON_BrepFace.

◆ SetTrimTypeFlags() [3/4]

bool ON_Brep::SetTrimTypeFlags	(	ON_BrepLoop &	,
		ON_BOOL32	bLazy = false )

◆ SetTrimTypeFlags() [4/4]

bool ON_Brep::SetTrimTypeFlags	(	ON_BrepTrim &	,
		ON_BOOL32	bLazy = false )

◆ SetVertexTolerance()

bool ON_Brep::SetVertexTolerance	(	ON_BrepVertex &	vertex,
		ON_BOOL32	bLazy = false ) const

◆ SetVertexTolerances()

bool ON_Brep::SetVertexTolerances ( ON_BOOL32 bLazy = false )

◆ SetVertices()

void ON_Brep::SetVertices ( void )

◆ ShrinkSurface()

bool ON_Brep::ShrinkSurface	(	ON_BrepFace &	face,
		int	DisableSide = 0 )

References ON_BrepFace.

◆ ShrinkSurfaces()

bool ON_Brep::ShrinkSurfaces ( )

◆ SizeOf()

unsigned int ON_Brep::SizeOf ( ) const

virtual

Reimplemented from ON_Object.

◆ SolidOrientation()

virtual int ON_Brep::SolidOrientation ( ) const

virtual

◆ SortFaceLoops()

bool ON_Brep::SortFaceLoops ( ON_BrepFace & face ) const

References ON_BrepFace.

◆ Standardize()

void ON_Brep::Standardize ( )

◆ StandardizeEdgeCurve() [1/2]

bool ON_Brep::StandardizeEdgeCurve	(	int	edge_index,
		bool	bAdjustEnds )

◆ StandardizeEdgeCurve() [2/2]

bool ON_Brep::StandardizeEdgeCurve	(	int	edge_index,
		bool	bAdjustEnds,
		int	EdgeCurveUse )

◆ StandardizeEdgeCurves()

void ON_Brep::StandardizeEdgeCurves ( bool bAdjustEnds )

◆ StandardizeFaceSurface()

bool ON_Brep::StandardizeFaceSurface ( int face_index )

◆ StandardizeFaceSurfaces()

void ON_Brep::StandardizeFaceSurfaces ( )

◆ StandardizeTrimCurve()

bool ON_Brep::StandardizeTrimCurve ( int trim_index )

◆ StandardizeTrimCurves()

void ON_Brep::StandardizeTrimCurves ( )

◆ StardardizeFaceSurfaces()

ON_DEPRECATED void ON_Brep::StardardizeFaceSurfaces ( )

◆ SubBrep()

ON_Brep * ON_Brep::SubBrep	(	int	subfi_count,
		const int *	sub_fi,
		ON_Brep *	sub_brep = 0 ) const

References ON_Brep().

◆ SurfaceUseCount()

int ON_Brep::SurfaceUseCount	(	int	surface_index,
		int	max_count = 0 ) const

◆ SwapCoordinates()

ON_BOOL32 ON_Brep::SwapCoordinates	(	int	,
		int	)

virtual

Reimplemented from ON_Geometry.

◆ SwapLoopParameters()

bool ON_Brep::SwapLoopParameters ( int )

protected

◆ SwapTrimParameters()

bool ON_Brep::SwapTrimParameters ( int )

protected

◆ Transform()

ON_BOOL32 ON_Brep::Transform ( const ON_Xform & )

virtual

Reimplemented from ON_Geometry.

◆ Trim() [1/2]

ON_BrepTrim * ON_Brep::Trim ( int trim_index ) const

◆ Trim() [2/2]

ON_BrepTrim * ON_Brep::Trim ( ON_COMPONENT_INDEX trim_index ) const

◆ TrimCurveUseCount()

int ON_Brep::TrimCurveUseCount	(	int	c2_index,
		int	max_count = 0 ) const

◆ TrimType()

ON_BrepTrim::TYPE ON_Brep::TrimType	(	const ON_BrepTrim &	trim,
		ON_BOOL32	bLazy = true ) const

◆ Vertex() [1/2]

ON_BrepVertex * ON_Brep::Vertex ( int vertex_index ) const

◆ Vertex() [2/2]

ON_BrepVertex * ON_Brep::Vertex ( ON_COMPONENT_INDEX vertex_index ) const

◆ Write()

ON_BOOL32 ON_Brep::Write ( ON_BinaryArchive & ) const

virtual

Reimplemented from ON_Object.

◆ ON_BinaryArchive::ReadV1_TCODE_LEGACY_FAC

bool ON_BinaryArchive::ReadV1_TCODE_LEGACY_FAC	(	ON_Object **	,
		ON_3dmObjectAttributes *	)

friend

References ON_Object::ON_Object().

◆ ON_BinaryArchive::ReadV1_TCODE_LEGACY_SHL

bool ON_BinaryArchive::ReadV1_TCODE_LEGACY_SHL	(	ON_Object **	,
		ON_3dmObjectAttributes *	)

friend

References ON_Object::ON_Object().

◆ ON_BrepFace

friend class ON_BrepFace

friend

Definition at line 3746 of file opennurbs_brep.h.

References ON_BrepFace.

Referenced by DeleteFace(), Face(), Face(), FlipFace(), NewConeFace(), NewCurveOnFace(), NewFace(), NewFace(), NewFace(), NewLoop(), NewPointOnFace(), NewRuledFace(), ON_BrepFace, ReadV1_LegacyLoop(), ReadV1_LegacyLoopStuff(), ReadV1_LegacyTrim(), ReadV1_LegacyTrimStuff(), RemoveSlits(), SetTrimBoundingBoxes(), SetTrimIsoFlags(), SetTrimTypeFlags(), ShrinkSurface(), and SortFaceLoops().

◆ ON_BrepFaceSide

friend class ON_BrepFaceSide

friend

Definition at line 3748 of file opennurbs_brep.h.

References ON_BrepFaceSide.

Referenced by ON_BrepFaceSide.

◆ ON_BrepRegion

friend class ON_BrepRegion

friend

Definition at line 3747 of file opennurbs_brep.h.

References ON_BrepRegion.

Referenced by ON_BrepRegion.

Member Data Documentation

◆ m_bbox

ON_BoundingBox ON_Brep::m_bbox

protected

Definition at line 3749 of file opennurbs_brep.h.

◆ m_brep_user

ON_U ON_Brep::m_brep_user

Definition at line 3726 of file opennurbs_brep.h.

◆ m_C2

ON_CurveArray ON_Brep::m_C2

Definition at line 3731 of file opennurbs_brep.h.

◆ m_C3

ON_CurveArray ON_Brep::m_C3

Definition at line 3733 of file opennurbs_brep.h.

◆ m_E

ON_BrepEdgeArray ON_Brep::m_E

Definition at line 3740 of file opennurbs_brep.h.

◆ m_F

ON_BrepFaceArray ON_Brep::m_F

Definition at line 3743 of file opennurbs_brep.h.

◆ m_is_solid

int ON_Brep::m_is_solid

protected

Definition at line 3758 of file opennurbs_brep.h.

◆ m_L

ON_BrepLoopArray ON_Brep::m_L

Definition at line 3742 of file opennurbs_brep.h.

◆ m_S

ON_SurfaceArray ON_Brep::m_S

Definition at line 3734 of file opennurbs_brep.h.

◆ m_T

ON_BrepTrimArray ON_Brep::m_T

Definition at line 3741 of file opennurbs_brep.h.

◆ m_V

ON_BrepVertexArray ON_Brep::m_V

Definition at line 3739 of file opennurbs_brep.h.

The documentation for this class was generated from the following file:

pcl/surface/3rdparty/opennurbs/opennurbs_brep.h

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Friends

Detailed Description

Constructor & Destructor Documentation

◆ ON_Brep() [1/2]

◆ ~ON_Brep()

◆ ON_Brep() [2/2]

Member Function Documentation

◆ AddEdgeCurve()

◆ AddSurface()

◆ AddTrimCurve()

◆ Append()

◆ BrepComponent()

◆ BrepForm()

◆ ChangeVertex()

◆ Clear_edge_user_i() [1/2]

◆ Clear_edge_user_i() [2/2]

◆ Clear_face_user_i()

◆ Clear_loop_user_i()

◆ Clear_trim_user_i()

◆ Clear_user_i()

◆ Clear_vertex_user_i()

◆ ClearBoundingBox()

◆ ClearEdgeVertices()

◆ ClearTrimVertices()

◆ CloseTrimGap()

◆ CollapseEdge()

◆ CombineCoincidentEdges()

◆ CombineCoincidentVertices()

◆ CombineContiguousEdges()

◆ Compact()

◆ ComputeLoopType()

◆ Create() [1/5]

◆ Create() [2/5]

◆ Create() [3/5]

◆ Create() [4/5]

◆ Create() [5/5]

◆ CreateMesh()

◆ CullUnused2dCurves()

◆ CullUnused3dCurves()

◆ CullUnusedEdges()

◆ CullUnusedFaces()

◆ CullUnusedLoops()

◆ CullUnusedSurfaces()

◆ CullUnusedTrims()

◆ CullUnusedVertices()

◆ DataCRC()

◆ Delete2dCurve()

◆ Delete3dCurve()

◆ DeleteEdge()

◆ DeleteFace()

◆ DeleteLoop()

◆ DeleteSurface()

◆ DeleteTrim()

◆ DeleteVertex()

◆ Destroy()

◆ DestroyMesh()

◆ DestroyRegionTopology()

◆ DestroyRuntimeCache()

◆ Dimension()

◆ Dump()

◆ DuplicateFace()

◆ DuplicateFaces()

◆ Edge() [1/2]

◆ Edge() [2/2]

◆ EdgeCurveUseCount()

◆ EmergencyDestroy()

◆ EvaluatePoint()

◆ ExtractFace()

◆ Face() [1/2]

◆ Face() [2/2]

◆ FaceIsSurface()

◆ Flip()

◆ FlipFace()

◆ FlipLoop()

◆ FlipReversedSurfaces()