#include <pcl/surface/3rdparty/opennurbs/opennurbs_polylinecurve.h>

Inheritance diagram for ON_PolylineCurve:

Public Member Functions
	ON_PolylineCurve ()
	ON_PolylineCurve (const ON_3dPointArray &)
	ON_PolylineCurve (const ON_PolylineCurve &)
ON_PolylineCurve &	operator= (const ON_PolylineCurve &)
ON_PolylineCurve &	operator= (const ON_3dPointArray &)
virtual	~ON_PolylineCurve ()
void	EmergencyDestroy ()
unsigned int	SizeOf () const
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
void	Dump (ON_TextLog &dump) const
ON_BOOL32	Write (ON_BinaryArchive &binary_archive) const
ON_BOOL32	Read (ON_BinaryArchive &binary_archive)
int	Dimension () const
ON_BOOL32	GetBBox (double boxmin, double boxmax, int bGrowBox=false) const
bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const
ON_BOOL32	Transform (const ON_Xform &xform)
bool	IsDeformable () const
bool	MakeDeformable ()
ON_BOOL32	SwapCoordinates (int i, int j)
ON_Interval	Domain () const
ON_BOOL32	SetDomain (double t0, double t1)
bool	ChangeDimension (int desired_dimension)
ON_BOOL32	ChangeClosedCurveSeam (double t)
int	SpanCount () const
ON_BOOL32	GetSpanVector (double *knot_values) const
int	Degree () const
ON_BOOL32	IsLinear (double tolerance=ON_ZERO_TOLERANCE) const
int	IsPolyline (ON_SimpleArray< ON_3dPoint > pline_points=NULL, ON_SimpleArray< double > pline_t=NULL) const
ON_BOOL32	IsArc (const ON_Plane plane=NULL, ON_Arc arc=NULL, double tolerance=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsPlanar (ON_Plane *plane=NULL, double tolerance=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsInPlane (const ON_Plane &test_plane, double tolerance=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsClosed () const
ON_BOOL32	IsPeriodic (void) const
bool	GetNextDiscontinuity (ON::continuity c, double t0, double t1, double t, int hint=NULL, int *dtype=NULL, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) const
bool	IsContinuous (ON::continuity c, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) const
ON_BOOL32	Reverse ()
ON_BOOL32	SetStartPoint (ON_3dPoint start_point)
ON_BOOL32	SetEndPoint (ON_3dPoint end_point)
ON_BOOL32	Evaluate (double, int, int, double , int=0, int =0) const
ON_BOOL32	Trim (const ON_Interval &)
bool	Extend (const ON_Interval &domain)
ON_BOOL32	Split (double, ON_Curve &, ON_Curve &) const
int	GetNurbForm (ON_NurbsCurve &, double=0.0, const ON_Interval *=NULL) const
int	HasNurbForm () const
ON_BOOL32	GetCurveParameterFromNurbFormParameter (double, double *) const
ON_BOOL32	GetNurbFormParameterFromCurveParameter (double, double *) const
bool	ParameterSearch (double t, int &index, bool bEnableSnap) const
bool	Append (const ON_PolylineCurve &)
int	PointCount () const
Public Member Functions inherited from ON_Curve
void	DestroyRuntimeCache (bool bDelete=true)
	ON_Curve ()
	ON_Curve (const ON_Curve &)
ON_Curve &	operator= (const ON_Curve &)
virtual	~ON_Curve ()
bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const
virtual ON_Curve *	DuplicateCurve () const
ON::object_type	ObjectType () const
ON_BOOL32	GetDomain (double t0, double t1) const
bool	SetDomain (ON_Interval domain)
virtual ON_BOOL32	GetSpanVectorIndex (double t, int side, int span_vector_index, ON_Interval span_domain) const
virtual ON_BOOL32	GetParameterTolerance (double t, double tminus, double tplus) const
bool	IsArcAt (double t, const ON_Plane plane=0, ON_Arc arc=0, double tolerance=ON_ZERO_TOLERANCE, double t0=0, double t1=0) const
virtual bool	IsEllipse (const ON_Plane plane=NULL, ON_Ellipse ellipse=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsClosable (double tolerance, double min_abs_size=0.0, double min_rel_size=10.0) const
ON_3dPoint	PointAt (double t) const
ON_3dPoint	PointAtStart () const
ON_3dPoint	PointAtEnd () const
ON_3dVector	DerivativeAt (double t) const
ON_3dVector	TangentAt (double t) const
ON_3dVector	CurvatureAt (double t) const
ON_BOOL32	FrameAt (double t, ON_Plane &plane) const
ON_BOOL32	EvPoint (double t, ON_3dPoint &point, int side=0, int *hint=0) const
ON_BOOL32	Ev1Der (double t, ON_3dPoint &point, ON_3dVector &first_derivative, int side=0, int *hint=0) const
ON_BOOL32	Ev2Der (double t, ON_3dPoint &point, ON_3dVector &first_derivative, ON_3dVector &second_derivative, int side=0, int *hint=0) const
ON_BOOL32	EvTangent (double t, ON_3dPoint &point, ON_3dVector &tangent, int side=0, int *hint=0) const
ON_BOOL32	EvCurvature (double t, ON_3dPoint &point, ON_3dVector &tangent, ON_3dVector &kappa, int side=0, int *hint=0) const
bool	FirstSpanIsLinear (double min_length, double tolerance) const
bool	LastSpanIsLinear (double min_length, double tolerance) const
bool	FirstSpanIsLinear (double min_length, double tolerance, ON_Line *span_line) const
bool	LastSpanIsLinear (double min_length, double tolerance, ON_Line *span_line) const
ON_NurbsCurve *	NurbsCurve (ON_NurbsCurve pNurbsCurve=NULL, double tolerance=0.0, const ON_Interval subdomain=NULL) const
void	DestroyCurveTree ()
Public Member Functions inherited from ON_Geometry
	ON_Geometry ()
	ON_Geometry (const ON_Geometry &)
ON_Geometry &	operator= (const ON_Geometry &)
virtual	~ON_Geometry ()
ON_BoundingBox	BoundingBox () const
ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const
ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const
ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Translate (const ON_3dVector &translation_vector)
ON_BOOL32	Scale (double scale_factor)
virtual void	ClearBoundingBox ()
virtual ON_BOOL32	HasBrepForm () const
virtual ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
virtual ON_COMPONENT_INDEX	ComponentIndex () const
Public Member Functions inherited from ON_Object
bool	CopyFrom (const ON_Object *src)
	ON_Object ()
	ON_Object (const ON_Object &)
ON_Object &	operator= (const ON_Object &)
virtual	~ON_Object ()
void	EmergencyDestroy ()
virtual void	MemoryRelocate ()
ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const
virtual ON_UUID	ModelObjectId () const
bool	SetUserString (const wchar_t key, const wchar_t string_value)
int	SetUserStrings (int count, const ON_UserString *user_strings, bool bReplace)
bool	GetUserString (const wchar_t *key, ON_wString &string_value) const
int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const
int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const
int	UserStringCount () const
ON_BOOL32	AttachUserData (ON_UserData *pUserData)
ON_BOOL32	DetachUserData (ON_UserData *pUserData)
ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const
void	PurgeUserData ()
ON_UserData *	FirstUserData () const
void	TransformUserData (const ON_Xform &xform)
void	CopyUserData (const ON_Object &source_object)
void	MoveUserData (ON_Object &source_object)

Public Attributes
ON_Polyline	m_pline
ON_SimpleArray< double >	m_t
int	m_dim

Additional Inherited Members
Protected Member Functions inherited from ON_Curve
bool	ParameterSearch (double t, int &index, bool bEnableSnap, const ON_SimpleArray< double > &m_t, double RelTol=ON_SQRT_EPSILON) const

Detailed Description

Definition at line 21 of file opennurbs_polylinecurve.h.

Constructor & Destructor Documentation

◆ ON_PolylineCurve() [1/3]

ON_PolylineCurve::ON_PolylineCurve ( )

Referenced by Append(), ON_PolylineCurve(), operator=(), and operator=().

◆ ON_PolylineCurve() [2/3]

ON_PolylineCurve::ON_PolylineCurve ( const ON_3dPointArray & )

◆ ON_PolylineCurve() [3/3]

ON_PolylineCurve::ON_PolylineCurve ( const ON_PolylineCurve & )

References ON_PolylineCurve().

◆ ~ON_PolylineCurve()

virtual ON_PolylineCurve::~ON_PolylineCurve ( )

virtual

Member Function Documentation

◆ Append()

bool ON_PolylineCurve::Append ( const ON_PolylineCurve & )

References ON_PolylineCurve().

◆ ChangeClosedCurveSeam()

ON_BOOL32 ON_PolylineCurve::ChangeClosedCurveSeam ( double t )

virtual

Reimplemented from ON_Curve.

◆ ChangeDimension()

bool ON_PolylineCurve::ChangeDimension ( int desired_dimension )

virtual

Reimplemented from ON_Curve.

◆ DataCRC()

ON__UINT32 ON_PolylineCurve::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

◆ Degree()

int ON_PolylineCurve::Degree ( ) const

virtual

Implements ON_Curve.

◆ Dimension()

int ON_PolylineCurve::Dimension ( ) const

virtual

Implements ON_Geometry.

◆ Domain()

ON_Interval ON_PolylineCurve::Domain ( ) const

virtual

Implements ON_Curve.

◆ Dump()

void ON_PolylineCurve::Dump ( ON_TextLog & dump ) const

virtual

Reimplemented from ON_Object.

◆ EmergencyDestroy()

void ON_PolylineCurve::EmergencyDestroy ( )

◆ Evaluate()

ON_BOOL32 ON_PolylineCurve::Evaluate	(	double	,
		int	,
		int	,
		double *	,
		int	= 0,
		int *	= 0 ) const

virtual

Implements ON_Curve.

◆ Extend()

bool ON_PolylineCurve::Extend ( const ON_Interval & domain )

virtual

Reimplemented from ON_Curve.

◆ GetBBox()

ON_BOOL32 ON_PolylineCurve::GetBBox	(	double *	boxmin,
		double *	boxmax,
		int	bGrowBox = false ) const

virtual

Implements ON_Geometry.

◆ GetCurveParameterFromNurbFormParameter()

ON_BOOL32 ON_PolylineCurve::GetCurveParameterFromNurbFormParameter	(	double	,
		double *	) const

virtual

Reimplemented from ON_Curve.

◆ GetNextDiscontinuity()

bool ON_PolylineCurve::GetNextDiscontinuity	(	ON::continuity	c,
		double	t0,
		double	t1,
		double *	t,
		int *	hint = NULL,
		int *	dtype = NULL,
		double	cos_angle_tolerance = ON_DEFAULT_ANGLE_TOLERANCE_COSINE,
		double	curvature_tolerance = ON_SQRT_EPSILON ) const

virtual

Reimplemented from ON_Curve.

◆ GetNurbForm()

int ON_PolylineCurve::GetNurbForm	(	ON_NurbsCurve &	,
		double	= 0.0,
		const ON_Interval *	= NULL ) const

virtual

Reimplemented from ON_Curve.

◆ GetNurbFormParameterFromCurveParameter()

ON_BOOL32 ON_PolylineCurve::GetNurbFormParameterFromCurveParameter	(	double	,
		double *	) const

virtual

Reimplemented from ON_Curve.

◆ GetSpanVector()

ON_BOOL32 ON_PolylineCurve::GetSpanVector ( double * knot_values ) const

virtual

Implements ON_Curve.

◆ GetTightBoundingBox()

bool ON_PolylineCurve::GetTightBoundingBox	(	ON_BoundingBox &	tight_bbox,
		int	bGrowBox = false,
		const ON_Xform *	xform = 0 ) const

virtual

Reimplemented from ON_Curve.

◆ HasNurbForm()

int ON_PolylineCurve::HasNurbForm ( ) const

virtual

Reimplemented from ON_Curve.

◆ IsArc()

ON_BOOL32 ON_PolylineCurve::IsArc	(	const ON_Plane *	plane = NULL,
		ON_Arc *	arc = NULL,
		double	tolerance = ON_ZERO_TOLERANCE ) const

virtual

Reimplemented from ON_Curve.

◆ IsClosed()

ON_BOOL32 ON_PolylineCurve::IsClosed ( ) const

virtual

Reimplemented from ON_Curve.

◆ IsContinuous()

bool ON_PolylineCurve::IsContinuous	(	ON::continuity	c,
		double	t,
		int *	hint = NULL,
		double	point_tolerance = ON_ZERO_TOLERANCE,
		double	d1_tolerance = ON_ZERO_TOLERANCE,
		double	d2_tolerance = ON_ZERO_TOLERANCE,
		double	cos_angle_tolerance = ON_DEFAULT_ANGLE_TOLERANCE_COSINE,
		double	curvature_tolerance = ON_SQRT_EPSILON ) const

virtual

Reimplemented from ON_Curve.

◆ IsDeformable()

bool ON_PolylineCurve::IsDeformable ( ) const

virtual

Reimplemented from ON_Geometry.

◆ IsInPlane()

ON_BOOL32 ON_PolylineCurve::IsInPlane	(	const ON_Plane &	test_plane,
		double	tolerance = ON_ZERO_TOLERANCE ) const

virtual

Implements ON_Curve.

◆ IsLinear()

ON_BOOL32 ON_PolylineCurve::IsLinear ( double tolerance = ON_ZERO_TOLERANCE ) const

virtual

Reimplemented from ON_Curve.

◆ IsPeriodic()

ON_BOOL32 ON_PolylineCurve::IsPeriodic ( void ) const

virtual

Reimplemented from ON_Curve.

◆ IsPlanar()

ON_BOOL32 ON_PolylineCurve::IsPlanar	(	ON_Plane *	plane = NULL,
		double	tolerance = ON_ZERO_TOLERANCE ) const

virtual

Reimplemented from ON_Curve.

◆ IsPolyline()

int ON_PolylineCurve::IsPolyline	(	ON_SimpleArray< ON_3dPoint > *	pline_points = NULL,
		ON_SimpleArray< double > *	pline_t = NULL ) const

virtual

Reimplemented from ON_Curve.

◆ IsValid()

ON_BOOL32 ON_PolylineCurve::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

◆ MakeDeformable()

bool ON_PolylineCurve::MakeDeformable ( )

virtual

Reimplemented from ON_Geometry.

◆ operator=() [1/2]

ON_PolylineCurve & ON_PolylineCurve::operator= ( const ON_3dPointArray & )

References ON_PolylineCurve().

◆ operator=() [2/2]

ON_PolylineCurve & ON_PolylineCurve::operator= ( const ON_PolylineCurve & )

References ON_PolylineCurve().

◆ ParameterSearch()

bool ON_PolylineCurve::ParameterSearch	(	double	t,
		int &	index,
		bool	bEnableSnap ) const

◆ PointCount()

int ON_PolylineCurve::PointCount ( ) const

◆ Read()

ON_BOOL32 ON_PolylineCurve::Read ( ON_BinaryArchive & binary_archive )

virtual

Reimplemented from ON_Object.

◆ Reverse()

ON_BOOL32 ON_PolylineCurve::Reverse ( )

virtual

Implements ON_Curve.

◆ SetDomain()

ON_BOOL32 ON_PolylineCurve::SetDomain	(	double	t0,
		double	t1 )

virtual

Reimplemented from ON_Curve.

◆ SetEndPoint()

ON_BOOL32 ON_PolylineCurve::SetEndPoint ( ON_3dPoint end_point )

virtual

Reimplemented from ON_Curve.

◆ SetStartPoint()

ON_BOOL32 ON_PolylineCurve::SetStartPoint ( ON_3dPoint start_point )

virtual

Reimplemented from ON_Curve.

◆ SizeOf()

unsigned int ON_PolylineCurve::SizeOf ( ) const

virtual

Reimplemented from ON_Curve.

◆ SpanCount()

int ON_PolylineCurve::SpanCount ( ) const

virtual

Implements ON_Curve.

◆ Split()

ON_BOOL32 ON_PolylineCurve::Split	(	double	,
		ON_Curve *&	,
		ON_Curve *&	) const

virtual

Reimplemented from ON_Curve.

References ON_Curve::ON_Curve().

◆ SwapCoordinates()

ON_BOOL32 ON_PolylineCurve::SwapCoordinates	(	int	i,
		int	j )

virtual

Reimplemented from ON_Geometry.

◆ Transform()

ON_BOOL32 ON_PolylineCurve::Transform ( const ON_Xform & xform )

virtual

Reimplemented from ON_Geometry.

◆ Trim()

ON_BOOL32 ON_PolylineCurve::Trim ( const ON_Interval & )

virtual

Reimplemented from ON_Curve.

◆ Write()

ON_BOOL32 ON_PolylineCurve::Write ( ON_BinaryArchive & binary_archive ) const

virtual

Reimplemented from ON_Object.

Member Data Documentation

◆ m_dim

int ON_PolylineCurve::m_dim

Definition at line 574 of file opennurbs_polylinecurve.h.

◆ m_pline

ON_Polyline ON_PolylineCurve::m_pline

Definition at line 572 of file opennurbs_polylinecurve.h.

◆ m_t

ON_SimpleArray<double> ON_PolylineCurve::m_t

Definition at line 573 of file opennurbs_polylinecurve.h.

The documentation for this class was generated from the following file:

pcl/surface/3rdparty/opennurbs/opennurbs_polylinecurve.h

Public Member Functions

Public Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ON_PolylineCurve() [1/3]

◆ ON_PolylineCurve() [2/3]

◆ ON_PolylineCurve() [3/3]

◆ ~ON_PolylineCurve()

Member Function Documentation

◆ Append()

◆ ChangeClosedCurveSeam()

◆ ChangeDimension()

◆ DataCRC()

◆ Degree()

◆ Dimension()

◆ Domain()

◆ Dump()

◆ EmergencyDestroy()

◆ Evaluate()

◆ Extend()

◆ GetBBox()

◆ GetCurveParameterFromNurbFormParameter()

◆ GetNextDiscontinuity()

◆ GetNurbForm()

◆ GetNurbFormParameterFromCurveParameter()

◆ GetSpanVector()

◆ GetTightBoundingBox()

◆ HasNurbForm()

◆ IsArc()

◆ IsClosed()

◆ IsContinuous()

◆ IsDeformable()

◆ IsInPlane()

◆ IsLinear()

◆ IsPeriodic()

◆ IsPlanar()

◆ IsPolyline()

◆ IsValid()

◆ MakeDeformable()

◆ operator=() [1/2]

◆ operator=() [2/2]

◆ ParameterSearch()

◆ PointCount()

◆ Read()

◆ Reverse()

◆ SetDomain()

◆ SetEndPoint()

◆ SetStartPoint()

◆ SizeOf()

◆ SpanCount()

◆ Split()

◆ SwapCoordinates()

◆ Transform()

◆ Trim()

◆ Write()

Member Data Documentation

◆ m_dim

◆ m_pline

◆ m_t